![Industrial Bearings Inc](https://fr.bearing-inc.com/uploaded_images/1609793.jpg)
- Industrial Bearings Inc
- roulements industriels, grossistes porteurs, portant en ligne, magasin de roulement Singapour
- Adresseà H guan cent Re, 31 / F, 69 à et GU ANR E, Singapour 608609
- Adresse Usineà H guan cent Re, 31 / F, 69 à et GU ANR E, Singapour 608609
- Le temps de travail9:00-18:00
- téléphone professionnel(Temps de travail)0065-31591578
- téléphone professionnel(Temps de non-travail)0065-31591578
- Fax0065-31591339
vane pumps
Contacter maintenantWhile vane pumps can handle moderate viscosity liquids, they excel at handling low viscosity liquids such as LP gas (propane), ammonia, solvents, alcohol, fuel oils, gasoline, and refrigerants. Vane pumps have no internal metal-to-metal contact and self-compensate for wear, enabling them to maintain peak performance on these non-lubricating liquids. Though efficiency drops quickly, they can be used up to 500 cPs / 2,300 SSU.A slotted rotor is eccentrically supported in a cycloidal cam. The rotor is located close to the wall of the cam so a crescent-shaped cavity is formed. The rotor is sealed into the cam by two sideplates. Vanes or blades fit within the slots of the impeller. As the rotor rotates (yellow arrow) and fluid enters the pump, centrifugal force, hydraulic pressure, and/or pushrods push the vanes to the walls of the housing. The tight seal among the vanes, rotor, cam, and sideplate is the key to the good suction characteristics common to the vane pumping principle.
Sorry! No matches were found.